Stihl iMOW 6.0 Gebrauchsanleitung Seite 82

English
5
► Plug the mains plug (4) into a correctly instal‐
led socket (5).
The LED on the docking station lights up
green.
11.3 Mounting the power supply on
a wall
The power supply can be mounted on a wall.
a
► Mount the power supply so that the following
conditions are met:
– Use suitable mounting materials.
– The power supply is level.
Following distances are complied with:
– The power supply is outside of the
range (a) of possible electrical installa‐
tions.
– A suitable socket is within reach of the
power supply.
– If possible, protect the location against
adverse weather conditions and direct sun‐
light.
82
12 Charging the Robot Mower
12.1
4
► Push the robot mower into the docking station
The charging time depends on various factors,
e.g. the battery temperature or the ambient tem‐
perature. For optimum performance, note the
recommended temperature ranges,
The LED (1) on the docking station lights up
white. An LED (2) lights up white on the light strip
of the robot mower.
After the first charging, the robotic mower will
charge automatically in the future as soon as it
returns to the docking station after a mowing job.
Energy efficient charging
In order to charge the robotic mower's battery
with a minimum amount of energy, all of the
robotic mower's and docking station's unneces‐
sary extra features besides the charging function
can be deactivated.
12 Charging the Robot Mower
Charging the robotic mower
up to the limit stop.
The robot mower carries out a system start
and begins charging.
2
23.7.
1
0458-011-9801-A