Hirschmann HiOS-2S RSPE Referenzhandbuch Seite 794

IEEE 802.3ad (Dot3ad)
adminmode: Modify the administration mode of the specified Link Aggrega-
tion Group. To activate the group, enable the administration mode.
linktrap: Enable/Disable link trap notifications for the specified Link Agg-
regation Group
static: Enable or disable static capability for the specified Link Aggregation
Group on a device. When enabled, LACP automatically helps prevent loops
and allows non-link aggregation partners to support LACP.
hashmode: Set the hash mode to be used by the load balancing algorithm
for specified Link Aggregation Group.
min-links: Set the minimum links for the specified Link Aggregation
Group.
Parameter Value
slot no./port no.
P-1
string
P-2
slot no./port no.
P-3
slot no./port no.
P-4
src-mac
P-5
dst-mac
src-dst-mac
src-ip
dst-ip
src-dst-ip
slot no./port no.
P-6

no link-aggregation modify
Disable the option

Mode: Global Config Mode

Privilege Level: Operator

Format: no link-aggregation modify <P-1> name addport
deleteport adminmode linktrap static hashmode min-
links
RM CLI HiOS-2S RSPE
Release 6.1 09/2016
Meaning
Enter a user-defined text, max. 15 charac-
ters.
Source MAC, VLAN, EtherType, and incoming
port associated with the packet.
Destination MAC, VLAN, EtherType, and inco-
ming port associated with the packet.
Source/Destination MAC, VLAN, EtherType, and
incoming port associated with the packet.
Source IP and Source TCP/UDP fields of the
packet.
Destination IP and Destination TCP/UDP Port
fields of the packet.
Source/Destination IP and source/destina-
tion TCP/UDP Port fields of the packet.
20.1 link-aggregation
265