Lldp Tlv Mac-Phy-Config-State - Hirschmann Hios-2S Rspe Referenzhandbuch

Link Layer Discovery Protocol (LLDP)
Parameter Value
[cr]
P-1

no lldp tlv link-aggregation
Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no lldp tlv link-aggregation <P-1>

39.3.7 lldp tlv mac-phy-config-state

Enable or disable mac-phy-config-state TLV transmission.

Mode: Interface Range Mode

Privilege Level: Operator

Format: lldp tlv mac-phy-config-state <P-1>
Parameter Value
[cr]
P-1

no lldp tlv mac-phy-config-state
Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no lldp tlv mac-phy-config-state <P-1>
444
Meaning
Enable the Bit.
Meaning
Enable the Bit.
39.3 lldp
RM CLI HiOS-2S RSPE
Release 6.1 09/2016