Hirschmann HiOS-2S RSPE Referenzhandbuch Seite 1691

EtherNet/IP
Die folgende Tabelle listet die Attribute von Instanz 1 auf:
Id Attribute
1 Status
2 Interface
Capability
flags
3 Config Cont-
rol
4 Physical Link
Object
5 Interface
Configuration
6 Host Name
7 Safety Net-
work Number
8 TTL Value
36
Access Data type
Rule
Get DWORD
Get DWORD
Set/Get DWORD
Get STRUCT of:UINT
Path sizeEPATH
Path
Set/Get STRUCT of:UDINT
IP addressUDINT
NetmaskUDINT
Gateway addressU-
DINT
Name
server 1UDINT-
Name
server 2STRING
Domain
name
Set/Get STRING
Get/Set USINT
4.2 EtherNet/IP-Entity-Parameter
Description
Interface Status:
Bit0-3: 0 Interface not configured
1 Interface contains valid con-
figBit6: AcdStatus (default 0)Bit7:
AcdFault (default 0)
Bit 0: BOOTP Client
Bit 1: DNS Client
Bit 2: DHCP Client
Bit 3: DHCP-DNS Update
Bit 4: Configuration setable
(within CIP),
Other bits reserved (0).Bit 7:
AcdCapable (TRUE shall indicate that
the device is ACD capable)
Bit 0-3: Value 0 using stored config,
Value 1 using BOOTP,
Value 2 using DHCP.Bit 4: 1
device uses DNS for name
lookup (always 0 because not
supported)
Other bits reserved (0).
Path to the Physical Link Object,
always {0x20,0xF6,0x24,0x01}
describing instance 1 of the Ethernet
Link Object.
IP Stack Configuration (IP-Address,
Netmask, Gateway, 2 Name servers
(DNS, if supported) and the domain
name).
Host Name (for DHCP DNS Update).
Not supported
Time to live value for IP multicast
packets. (1–255)The default values:
TTL = 1
UM IndustProtocol HiOS-2S RSPE
Release 6.1 09/2016