HiDiscovery
Parameter Value
read-write
P-1
read-only
23.1.3 network hidiscovery blinking
Enable/disable the HiDiscovery blinking sequence on this device. This prefe-
rence is not saved in configuration
Mode: Privileged Exec Mode
Privilege Level: Operator
Format: network hidiscovery blinking
no network hidiscovery blinking
Disable the option
Mode: Privileged Exec Mode
Privilege Level: Operator
Format: no network hidiscovery blinking
23.1.4 network hidiscovery relay
Enable/disable the HiDiscovery relay status.
Mode: Privileged Exec Mode
Privilege Level: Operator
Format: network hidiscovery relay
RM CLI HiOS-2S RSPE
Release 6.1 09/2016
Meaning
Allow detection and configuration.
Allow only detection, no configuration.
23.1 network
293