Hirschmann HiOS-2S RSPE Referenzhandbuch Seite 1695

EtherNet/IP
Id Attribute
106=0x6A Ethernet
Interface
Description
107=0x6B Port Monitor
108=0x6C Quick
Connect
40
Access Data type
Rule
Get/Set STRING [max. 64
Bytes] even number
of Bytes
Get/Set DWORD
Get/Set USINT
4.2 EtherNet/IP-Entity-Parameter
Description
Interface/Port Description (from MIB
II ifDescr), e.g. "Unit: 1 Slot: 2 Port: 1
- 10/100 Mbit TX", or "unavailable",
max. 64 Bytes.
Bit 0: Link Flap
1 ON,
0 OFF
Bit 1:CRC/Fragment
1 ON,
0 OFF
Bit 2:Duplex Mismatch
1 ON,
0 OFFBit 3:Overload-Detection
1 ON,
0 OFFBit 4:Link-Speed/ Duplex
Mode
1 ON,
0 OFFBit 5-6:Action
(to be performed in the event)
Bit 01:Deactivate PortBit 10:Send
TrapBit 7-11:Active Condition
(displays which condition
caused an action to occur)
Bit 00001: Link Flap
CRC/Fragments
Duplex Mismatch
Overload-Detection
Bit 10000: Link-Speed/ Duplex
mode)Bit 12-15: Reser-
ved (always 0)
Enable /disable Quick Connect on
the interface. If you enable Quick
Connect, then the device sets the
port speed to 100FD, disables auto-
negotiation, and spanning tree on the
interface.
Quick Connect (1 ON, 0 OFF)
UM IndustProtocol HiOS-2S RSPE
Bit 00010:
Bit 00100:
Bit 01000:
Release 6.1 09/2016