Hirschmann HiOS-2S RSPE Referenzhandbuch Seite 1692

EtherNet/IP
Id Attribute
9 Mcast Config Get/Set STRUCT of:USINT
10 SelectedAcd Get/Set BOOL
11 LastConflict-
Detected
Die folgende Tabelle listet die Hirschmann-Erweiterungen zum TCP/IP Inter-
face Object auf:
Id Attribute
100=0x64 Cable Test Set/Get STRUCT of:USINT
101=0x65 Cable Pair
Size
102=0x66 Cable Test
Result
UM IndustProtocol HiOS-2S RSPE
Release 6.1 09/2016
Access Data type
Rule
Alloc control,
USINT reserved,
UINT Num Mcast,
UDINT Mcast
Start Addr
Get STRUCT of:USINT
AcdActivity,Array of
6 USINT,
RemoteMAC
Array of 28 USINT
ArpPdu
Access Data type
Rule
Interface,USINT Sta-
tus
Get USINT
Get STRUCT of: USINT
Interface,USINT Cab-
lePair,USINT Cab-
leStatus,USINT
CableMinLength,
USINT
CableMaxLengthU-
SINTCableFailure-
Location
4.2 EtherNet/IP-Entity-Parameter
Description
Alloc Control = 0, Number of IP multi-
cast addresses = 32, Multicast start
address = 239.192.1.0.
Enable ACD (1 default).Disable ACD
(0)
ACD Diagnostic Parameters
Description
STRUCT of: USINT Interface
USINT Status (active (1)
Success (2)
Failure (3)
Uninitialized (4)
Size of the Cable Test Result
STRUCT of:2 Pair for 100BASE4 Pair
for 1000BASE
100BASE:{{Interface,Cable-
Pair1,CableStatus, CableMin-
Length, CableMaxLength,
CableFailureLocation}{Interface,Cab-
lePair2,CableStatus, CableMin-
Length, CableMaxLength,
CableFailureLoca-
tion}}1000BASE:{{Interface,Cable-
Pair1,CableStatus, CableMinLength,
CableMaxLength, CableFailureLoca-
tion}{Interface,CablePair2,CableSta-
tus, CableMinLength,
CableMaxLength, CableFailureLoca-
tion}{Interface,CablePair3,CableSta-
tus, CableMinLength,
CableMaxLength, CableFailureLoca-
tion}{Interface,CablePair4,CableSta-
tus, CableMinLength,
CableMaxLength, CableFailureLoca-
tion}}
37