Inlinepower Power-Limit - Hirschmann Hios-2S Rspe Referenzhandbuch

Power Over Ethernet (PoE)

52.2.9 inlinepower power-limit

Configure the interface related inline maximum power that is reserved for a
connected powered device (PD). The power limit is ignored if it is set to 0 or
it is exceeded by the maximum observed power consumption.

Mode: Interface Range Mode

Privilege Level: Operator

Format: inlinepower power-limit <P-1>
Parameter Value
P-1 xxx_0.000..30.000
RM CLI HiOS-2S RSPE
Release 6.1 09/2016
Meaning
PoE power limit in watts (e.g. 12.54).
52.2 inlinepower
565