Dot1X Port-Control; Dot1X Re-Authentication - Hirschmann Hios-2S Rspe Referenzhandbuch

IEEE 802.1x (Dot1x)

19.2.3 dot1x port-control

Set the authentication mode on the specified port.

Mode: Interface Range Mode

Privilege Level: Operator

Format: dot1x port-control <P-1>
Parameter Value
auto
P-1
force-authorized
force-unauthorized
multi-client

19.2.4 dot1x re-authentication

Enable or disable re-authentication for the given interface.

Mode: Interface Range Mode

Privilege Level: Operator

Format: dot1x re-authentication

no dot1x re-authentication
Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no dot1x re-authentication
RM CLI HiOS-2S RSPE
Release 6.1 09/2016
Meaning
Port is actually controlled by protocol.
Port is authorized unconditionally
(default).
Port is unauthorized unconditionally.
If more than one client is attached to the
port, then each client needs to authenticate
separately.
19.2 dot1x
253