Switch-Agent-Objekt - Hirschmann HiOS-2S RSPE Referenzhandbuch

EtherNet/IP
Id Attribute
109=0x6D SFP Diagno-
stics
4.2.4

Switch-Agent-Objekt

Das Gerät unterstützt das herstellerspezifische Ethernet-Switch-Agent-
Objekt von Hirschmann (Class Code 0x95, 95
rations- und Informationsparameter mit Instanz 1.
Die folgende Tabelle listet die Instanzattribute des Ethernet-Switch-Agent-
Objektes auf:
Switch Status
UM IndustProtocol HiOS-2S RSPE
Release 6.1 09/2016
Access Data type
Rule
Get STRUCT
of:STRING
Module type
SHORT-STRING
Serial NumberU-
SINTConnectorU-
SINTSupportedDIN
TTemperature
°CDINT Tx Power in
mWDINTRx Power
in mWDINTRx
Power in dBm-
DINTTx Power in
dBm
Id 0x1
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
4.2 EtherNet/IP-Entity-Parameter
Description
STRUCT of:{ STRING Module type
UDINT Serial Number USINT
Connector USINT
DINT Temperature °C DINT
Tx Power in mW DINT
in mW DINT
DINT Rx Power in dBm
149) für die Gerätekonfigu-
H,
DWORD (32 Bit) RO
Like the signal contact, the
value indicates the Device
Overall state (0 ok, 1 failed).
Device Security Status (0 ok, 1
failed)
Power Supply 1 (0 ok, 1 failed
or not existing)
Power Supply 2 (0 ok, 1 failed
or not existing)
Reserved
Reserved
Signal Contact 1 (0 closed, 1
open)
Signal Contact 2 (0 closed, 1
open or not existing)
Supported
Rx Power
Tx Power in dBm
41