ACD GRUPPE M2Smart SE Set Kurzübersicht Seite 81

25.6.5.4 Technical Data ePop-Loq
The table below includes the technical data for the ePop-Loq
Housing
Operating
temperature
Storage temperature
Rel. Humidity
Protection class
Device dimensions
Weight
nterfaces
25.6.5.5 EU declaration of conformity ePop-Loq
26 Accessories
26.1 M2Grip5/M2Grip5 SE
A handle is available as an accessory for the M2Smart
tools.
Fig. 84: M2Grip5/M2Grip5 SE
The upper and lower slide mechanisms remain untouched and can therefore still be used for different
M2Modules. It is still possible to charge the M2Smart
Please note that the M2Grip5 is suitable for the M2Smart
2D shortrange Imager (SE4770). The M2Grip5 SE is suitable for the M2Smart
(SE4750MR).
®
M2Smart SE_Set_Kurzübersicht_Brief Overview_V1.19_de_en
®
Adapter
Nylon
-20 °C to 50 °C/ -4 °F to 122 °F
Condensation of the device must be avoided.
-20 °C to 60 °C/-4 °F to 140 °F
5 % - 90 % non-condensing
IP54
165 x 82 x 37 mm (W x H x D)
52 g
USB (Full-Speed) of the M2Smart
(e. g. model 2128P)
ACD Elektronik GmbH hereby declares that the ePop-Loq
directive 2014/30/EU. The complete text of the EU Declaration of Conformity is
available in the customer portal at the following internet address:
https://www.acd-gruppe.de/en/downloads/
®
Adapter plug-in module.
Technical Data
®
SE to the UHF-RFID Reader
®
Adapter
®
SE. It can be attached to the M2Smart
®
SE with M2Grip5/M2Grip5 SE in the DS2Smart
®
SE without Imager and for the M2Smart
®
Adapter complies with the
®
SE without
®
®
SE with
®
SE with 2D midrange Imager
81 / 88
.