ACD GRUPPE M2Smart SE Set Kurzübersicht Seite 58

18.2.2 Power supply
®
The M2Smart SE and the replacement rechargeable battery may only be charged in the DS2Smart
station and the two replacement rechargeable batteries may only be charged in the DS2Battery docking
station with the appropriate power supply.

External power supply for DS2Smart

Input voltage

Output voltage

Power cable (country-specific)
18.2.3 Interfaces
®
18.2.3.1 DS2Smart
The interfaces of the docking station DS2Smart
These are mounted on the rear.
Fig. 66: Interfaces of the DS2Smart
The connections are described from left to right:

The USB socket type A is the USB host interface. The connected USB devices are identified by the
USB host adapter in the M2Smart

The RJ45 socket is the Ethernet interface (10/100 Mbit). The network communication takes place via
the Ethernet interface on the M2Smart

Insert the DC connector of the power supply in the DC socket for the supply voltage.
®
18.2.3.2 DS2Smart
The interfaces of the docking station DS2Smart
described below. These are mounted on the rear.
Fig. 67: Interfaces of the DS2Smart
®
M2Smart SE_Set_Kurzübersicht_Brief Overview_V1.19_de_en
®
/DS2Battery
~
100 - 240 V AC; 1.0 A max.; 50 - 60 Hz
15 V DC; 2.4 A
Charging and transmission box
®
Charging and transmission box
®
SE.
®
SE.
Charging box und DS2Smart
®
Charging box and the DS2Smart
®
Charging and transmission box will be described below.
®
Developer box
®
Charging box and the DS2Smart
®
Developer box
®
docking
®
Developer box will be
58 / 88