Charging cradle for replacement rechargeable battery
CHARGE LED lit red:
CHARGE LED lit green:
CHARGE LED not lit:
The charging time of a battery of the M2Smart
18.2.5 DS2Battery
The status LEDs of the DS2Battery docking station will be described below.
Fig 70: Status LEDs of the DS2Battery
Charging cradle for replacement rechargeable battery
CHARGE LED lit red:
CHARGE LED lit green:
CHARGE LED not lit:
The charging time of a battery of the M2Smart
18.3 Software
The software for the Mobile Handheld Computer is described in various documentations, such as the
"Administration Manual" and the "Programming Manual." These documentations are available via the
following link in the customer portal:
If you need additional assistance, please contact our support hotline:
///ACD Elektronik GmbH
Engelberg 2
88480 Achstetten, Germany
Tel.: +49 7392 708-488
E-Mail:
support.technik@acd-elektronik.de
Web:
https://www.acd-gruppe.de/en/
The support hotline is available from Monday to Thursday from 8:00 AM to 5:00 PM and on Fridays from
8:00 AM to 3:00 PM.
®
M2Smart
SE_Set_Kurzübersicht_Brief Overview_V1.19_de_en
Replacement battery is being charged
Replacement battery is fully charged
There is no replacement battery inserted in the docking
station
®
SE is approx. 4.5 hours at room temperature.
Replacement battery is being charged
Replacement battery is fully charged
There is no replacement battery inserted in the docking
station
®
SE is approx. 4.5 hours at room temperature.
https://www.acd-gruppe.de/en/downloads/
60 / 88