ACD GRUPPE M2Smart SE Set Kurzübersicht Seite 80

Remote station of theUHF RFID reader
Fig. 81: Remote station of the UHF RFID reader
The existing combination of M2Smart
Both devices can be operated independently of each other.
The disassembly of the UHF RFID reader (e.g. model 2128P) or the ePop-Loq
reverse order to the assembly.
For the operation of the TSL UHF RFID reader (e.g. model 2128P), please refer to the operating instructions
or quick start guide of the reader.
To change the battery of the M2Smart
removed.
The camera of the M2Smart
®
The M2Smart SE devices and the TSL UHF RFID reader (e.g. model 2128P) each have separate batteries.
®
The M2Smart SE and the TSL UHF RFID reader (e.g. model 2128P) can be charged together
(simultaneously) in the docking station of the reader, see figure below.
Furthermore, it is of course possible to charge the M2Smart
corresponding docking station separately from each other.
Fig. 83: Charging the M2Smart
®
M2Smart SE_Set_Kurzübersicht_Brief Overview_V1.19_de_en
®
SE and UHF RFID reader can now be used.
®
SE, the TSL UHF RFID reader and the ePop-Loq
®
SE cannot be used with the ePop-Loq
®
SE incl. UHF RFID reader
Fig. 82: M2Smart
®
adapter attached to the M2Smart
®
SE in the DS2Smart
Remark:
In the figure on the left, the AC power
supply of the UHF RFID reader docking
station is not shown.
®
SE with built-in UHF RFID reader
®
adapter is done in the
®
Adapter must be
®
®
and the reader in the
80 / 88
SE.