Trumpf TruConvert DC 1008 Betriebsanleitung Seite 107

Alarmmeldungen
Number Message
40300 RS-485 communica-
tion alarm
40301 RS-485 communica-
tion alarm
40302 Active interface
(Modbus or Web-
GUI) communica-
tion timeout has
occured.
40303 RS-485 communica-
tion alarm
40304 No slave module
was found, please
check RS-485 con-
nection(s).
40305 Number of or combi-
nation of connected
slave types not sup-
ported.
40412 Software versions
of system control
and module(s) do
not match.
40413 Software versions
of system control
and module(s) do
not match.
40414 Software versions
of system control
and module(s) do
not match.
40415 Software versions
of system control
and module(s) do
not match.
40416 Software versions
of system control
and module(s) do
not match.
40419 Material numbers of
AC/DC Modules are
wrong or do not
match
40420 Module alarm cau-
sed system transi-
tion to alarm state
60090 Battery overvoltage
A67-0140-00.BKde-0
01-09
Effect
No operation possi-
ble.
No operation possi-
ble.
No operation possi-
ble.
No operation possi-
ble.
System cannot
finish start-up proce-
dure.
System cannot
finish start-up proce-
dure.
System cannot
finish start-up proce-
dure.
System cannot
finish start-up proce-
dure.
System cannot
finish start-up proce-
dure.
System cannot
finish start-up proce-
dure.
System cannot
finish start-up proce-
dure.
No operation possi-
ble.
Entire system chan-
ges into alarm state.
No operation possi-
ble.
2024-08-01
Cause Action
Communication pro- Check RS-485 com-
blem on RS-485 munication.
bus.
Communication pro- Check RS-485 com-
blem on RS-485 munication.
bus.
Active interface Check active inter-
(Modbus or Web- face (Modbus or
GUI) communica- WebGUI) or disable
tion timeout has timeout.
occured.
Communication pro- Check RS-485 com-
blem on RS-485 munication.
bus.
No slave module Check RS-485 con-
was found. nection(s) and
modules.
Number of or combi- Check module confi-
nation of connected guration. Only
slave types not sup- homogeneous
ported. modules are allo-
wed on one
RS-485 bus.
Software versions Software update
of system control necessary.
and module(s) do
not match.
Software versions Software update
of system control necessary.
and module(s) do
not match.
Software versions Software update
of system control necessary.
and module(s) do
not match.
Software versions Software update
of system control necessary.
and module(s) do
not match.
Software versions Software update
of system control necessary.
and module(s) do
not match.
Material numbers of Check compatibility
AC/DC modules are of material numbers.
wrong or do not
match.
Alarm triggered by Check alarm on
module or submo- modules or submo-
dule. dules. Check alarm
policy.
Battery voltage too Check battery vol-
high. tage.
Caused
by
System
control
System
control
System
control
System
control
System
control
System
control
System
control
System
control
System
control
System
control
System
control
System
control
System
control
DC-DC
module
101
Fehlersuche