ECOLAB EcoTrans II pH Betriebsanleitung Seite 66

General
Symbols on the packaging
Symbol Name
Keep this product
1.5 Storage
Under certain circumstances, instructions for storage, which go beyond the
requirements listed here, can be found on the package.
These must be observed accordingly.
Please note the following storage conditions:
n Do not store outdoors.
n Store in a dry and dust-free place.
n Do not expose to aggressive media.
n Protect from sunlight.
n Avoid mechanical vibrations.
n Storage temperature and relative humidity:
Follow the information in section "Technical data".
n For storage periods of more than 3 months, check the general condition of all parts
and packaging regularly.
If necessary, refresh or renew the preservative.
1.6 Contact
Manufacturer
Ecolab Engineering GmbH
Raiffeisenstraße 7
D-83313 Siegsdorf
Telephone (+49) 86 62 / 61 0
Fax (+49) 86 62 / 61 166
engineering-mailbox@ecolab.com
http://www.ecolab-engineering.com
MAN052993 Rev 2-01.2024
Description
The arrows indicate the top side of the package.
Top
They must always point upwards, otherwise the contents may be
damaged.
Protect packages from moisture and keep dry.
dry
Cold
Protect packages from the cold (frost).
The package may be stacked with other similar packages until the
Stacking
specified maximum number is reached. Pay attention to the exact
stacking number.
Before contacting the manufacturer,
we always recommend contacting your
distributor first.
10