HEYLO K 120 Betriebsanleitung Seite 78

Oil heater K 120 (R) / K 160 (R)
20.3 Maintenance schedule
Compo- Action Description of the
nent to be action
taken*
Entire V Check for signs of
machine external damage and
leakage
* V = visual inspection, Ch = checking, R = re-
placement, C = cleaning
**CO = customer (operator), CS = customer
(specialist), M = manufacturer
Tab. 20:
Daily maintenance schedule
Compo- Action Description of the
nent to be action
taken*
Oil filter A Replace filter, see
burner operating
manual
Oil nozzle A Replace nozzle, see
operating manual for
burner
Burners C Thoroughly clean
internal parts, refer
to burner operating
manual
* V = visual inspection, Ch = checking, R = re-
placement, C = cleaning
**CO = customer (operator), CS = customer
(specialist), M = manufacturer
Tab. 21:
Annual maintenance schedule
Compo- Action Description of the
nent to be action
taken*
Combus- C Clean combustion
tion chamber and replace
chamber all seals, see burner
76 / 85
Compo-
nent
Per-
formed
by**
Tab. 22:
Every 2 years
CO
NOTICE
Check exhaust gas values
All maintenance work must be checked and com-
pleted by an exhaust gas analysis. This work may
only be carried out by a trained specialist.
20.4
Per-
Spare parts must meet the technical requirements
formed
specified by HEYLO. HEYLO original spare parts
by**
must meet stringent requirements.
CS EYLO assumes no warranty for any damage
caused by the use of spare parts from other man-
ufacturers.
Enquiries and orders In connection with wear and
CS
spare parts, please contact your dealer or HEYLO
directly, providing the following information:
– Device type,
CS
– Serial number,
– Year of construction,
– Designation of the component,
– Quantity,
– Form of shipping.
See also
 Contacting DANTHERM GmbH
20.5
Per-
formed
by**
HEYLO recommends signing a maintenance con-
tract with the HEYLO Service Partner.
CS
See also
Action Description of the
to be action
taken*
operating manual
Wear and spare parts
[
Customer service by the
manufacturer
Per-
formed
by**
48]
EN