Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The following personal protective equipment must
be worn during transport and installation:
– Protective gloves to prevent the hands becom-
ing crushed or trapped and to protect them
from heat
– Safety shoes to protect against impacts or fall-
ing over
During cleaning and maintenance, the following
must be worn:
– Respiratory protection against inhalation of
soot particles and dust
14.7
Residual hazards
The following residual hazards cannot be elimi-
nated completely.
– Danger that unauthorized and unqualified per-
sons may operate the machine.
– Danger of oil leakage due to improper installa-
tion of the heating oil supply.
– There is a risk of burns on the exhaust gas
duct.
– Danger of deflagration if the burner is manipu-
lated.
Consequently, the company operating the device
must ensure that only authorized and qualified
persons have access to the machine and its con-
trol device.
15
Product description
The Heylo oil heater is available in four different
versions. The device variants differ in the nominal
heat load and the fan type:
– K 120 with 120 kW nominal heat load and axial
fan,
– K 120 R with 120 kW nominal heat load and
radial fan,
– K 160 with 156 kW nominal heat load and axial
fan,
EN
Oil heater K 120 (R) / K 160 (R)
– K 160 R with 161 kW nominal heat load and
radial fan.
The devices with axial fan each have two wheels
and two skids on which the device can be parked
on flat surfaces to prevent it from rolling away.
The devices with radial fan have two lockable roll-
ers instead of the skids.
15.1
Identification of the machine
The device must be clearly identified by the type
plate on the burner box.
Rating plates of the device types
The type plate bears the following information on
the device:
Tab. 14:
Rating plate
– Model
– Type number
– Notes on electrical
connection
– Article number
15.2
General description
K series devices are compact, versatile, easily
transportable mobile hot air heaters for heating
and drying. They worked equally well with and
without chimney connection and are compact,
light and robust.
Thanks to its innovative burner technology and
highly efficient stainless steel heat exchanger, the
device is one of the most economical of its kind.
The devices fulfil the requirements according to
the legal regulations (for Germany: BImSchG, for
Switzerland: LRV and for Austria: LHKG of the
federal states) and can be removed by the chim-
ney sweep if required.
The device must only be operated:
– For the purpose for which it was intended
– Year of construction
– Serial number
– Technical details
53 / 85
Werbung
