Configuring Cascade Switch Connections; Adding And Modifying Cascaded Switch Connections - Fujitsu KVM s2-0411 Bedienungsanleitung

Using the KVM s3 Client Appliance Management Panel
5.12

Configuring cascade switch connections

The Cascade Switches category displays cascade switch information, including the
KVM-IAs, EIDs, cascade switch type, and the port to which each is connected.
Figure 32: AMP Settings - Cascaded Switches
5.12.1 Adding and modifying cascaded switch
connections
Click the Settings tab in the AMP.
Select the Cascaded Switches category.
Complete one of the following steps:
• Click the pull-down list next to the cascade switch and select the cascade
switch type to assign.
• If the cascade switch type is not in the pull-down list, add a cascade switch to
the Existing Cascaded Switches list by clicking the Add button. The Add
Cascaded Switch window opens.
Type the name of the cascade switch and select the cascade switch type from
the list.
92
590-784-609D