Click OK to add the cascade switch. The cascade switch is now in the Existing
Cascaded Switches list and in the Cascade Switch pull-down list.
Repeat step 3 for each cascade switch to be configured.
Complete one of the following steps:
•
Click Apply to save any changes without exiting the AMP.
-or-
•
Click OK to save any changes and exit the AMP.
-or-
•
Click Cancel to exit the AMP without saving any changes.
5.13
Viewing version information
The Versions category displays firmware version numbers.
5.13.1
Viewing appliance version information
The Versions - Hardware subcategory displays the hardware component version
numbers of the unit.
5.13.2
Viewing KVM-IA version information
The Versions - KVM-IAs subcategory displays KVM-IA version information. You can
individually view and upgrade KVM-IAs from this category.
5.14
Upgrading firmware
You can upgrade the firmware for either the KVM appliances or the KVM-IAs.
5.14.1
Automatic firmware upgrades
You can set the AMP to upgrade the KVM-IA firmware automatically.
5.14.1.1
Enable automatic KVM-IA firmware upgrades
Click the Settings tab in the AMP.
Select the Versions - KVM-IA subcategory.
590-784-609D
Viewing version information
93