Accessing Servers From The Kvm S3 Client; Closing A Video Viewer Session; Accessing Servers From The On-Board Web Interface - Fujitsu KVM s2-0411 Bedienungsanleitung

Using the Video Viewer
4.1

Accessing servers from the KVM s3 Client

Click the Devices tab in the Explorer.
Complete one of the following steps:
• Double-click on the target device in the Unit list.
-or-
• Select the target device, then click the Connect Video button.
-or-
• Right-click on the target device. Select Connect Video from the pop-up menu.
-or-
• Select the target device and press Enter.
If the target device is not being viewed by another user, the Video Viewer opens in a
new window. If the target device is being accessed by another user, you might have the
option to preempt the session, share the session, or observe the session in stealth
mode, depending on your access rights.
If this is the first unit access of the KVM s3 Client session, a user name and password is
required.
Important: A user name and password is not required for any subsequent access
attempts during the same KVM s3 Client session unless you clear the current cached
credentials.
4.1.1

Closing a Video Viewer session

• Select File - Exit from the Video Viewer menu.
• Click X to close the Video Viewer session.
4.2 Accessing servers from the on-board web
interface
The Connections tab in the on-board web interface allows you to view the connected
servers and their status. You may click on a server name to launch the Viewer.
To launch the on-board web interface, see "Launching the on-board web interface" on
page 7.
Symbol Description
Server is online
Server is offline
Server is unavailable
Table 2: On-board Web Interface Server Status Symbols
34
590-784-609D