Adjusting The View; Aligning The Mouse Cursors; Refreshing The Screen; Enabling Or Disabling Full Screen Mode - Fujitsu KVM s2-0411 Bedienungsanleitung

Using the Video Viewer
Area Description
D Single Cursor Mode button: Hides the local cursor and displays only the
target device cursor.
E Refresh Video button: Regenerates the digitized video image of the target
device desktop.
F Align Local Cursor button: Re-establishes true tracking of the local cursor
to the target device cursor.
G User-selected buttons: You can choose to display additional buttons and
macro commands on the toolbar.
H Connection Status indicator: Icons indicate the status of the KVM session.
See Table 3 for more information.
Table 5: Video Viewer window areas (Continued)
4.10

Adjusting the view

Using menus or buttons in the Video Viewer window, you can:
• Align the mouse cursors.
• Refresh the screen.
• Enable or disable full screen mode.
• Enable automatic or manual scaling of the session image. With automatic scaling,
the desktop window remains fixed and the target device image is scaled to fit the
window. With manual scaling, a drop-down menu of supported image scaling
resolutions is visible.
4.10.1

Aligning the mouse cursors

Click the Align Local Cursor button in the Video Viewer toolbar. The local cursor
aligns with the cursor on the target device.
If cursors drift out of alignment, turn off mouse acceleration on the target device.
4.10.2

Refreshing the screen

Click the Refresh Image button in the Video Viewer toolbar.
Select View - Refresh from the Video Viewer menu. The digitized video image
is regenerated.
4.10.3

Enabling or disabling full screen mode

Complete one of the following steps:
• If you are using Windows, click the Maximize button in the upper right corner
of the window.
-or-
• Select View - Full Screen from the Video Viewer menu.
48
590-784-609D