Fujitsu KVM s2-0411 Bedienungsanleitung Seite 103

Using the KVM s3 Client Appliance Management Panel
Figure 31: AMP Settings - Devices
Select the target device from the list that you want to modify. You can only modify
one target device at a time.
Click Modify.
The pop-up window lists the current name of the target device as stored in both the
appliance and the client database (not necessarily the same).
Type the new name of the target device in the New Name field.
Complete one of the following steps:
• Click OK to change the target device name.
-or-
• Click Cancel to keep the target device name as is.
Repeat the steps 3 through 7 for each target device name that you want to change.
90
590-784-609D