Figure 13: Viewer Mouse Session Options window
4.11.1
Changing the mouse cursor setting
The Video Viewer offers five display choices for the local mouse cursor. You can also
select no cursor or the default cursor.
Select Tools - Session Options from the Video Viewer menu. The Session
Options window opens.
Click the Mouse tab.
Select a mouse cursor type in the Local Cursor area.
Click OK.
4.11.2
Setting mouse scaling
You can select any of three preconfigured mouse scaling options or set custom scaling.
The preconfigured settings are: Default (1:1), High (2:1) or Low (1:2), as follows:
•
In a 1:1 scaling ratio, every mouse movement on the desktop window sends an
equivalent mouse movement to the target device.
•
In a 2:1 scaling ratio, the same mouse movement sends a 2X mouse movement.
•
In a 1:2 scaling ratio, the value is 1/2X.
Set mouse scaling by doing the following:
Select Tools - Session Options from the Video Viewer menu. The Session
Options window opens.
Click the Mouse tab.
To use one of the preconfigured settings, check the corresponding radio button in
the Mouse Scaling area.
590-784-609D
Changing the mouse cursor setting
51