Pc Hardware Configuration Requirements; Sun Hardware Configuration Requirements; Browser Requirements; Installing The Software - Fujitsu KVM s2-0411 Bedienungsanleitung

Installation
• Microsoft Windows Vista™ Business
• Microsoft Windows XP Professional Service Pack 2
• Microsoft Windows 2000 Professional Service Pack 4
• SuSE® Linux® Enterprise Server 10
• SuSE Linux Enterprise Server 9
• Red Hat® Enterprise Linux 3.0, 4.0 and 5.0 WS/ES/AS
2.2.1.3

PC hardware configuration requirements

The following list contains the PC hardware configuration requirements for running the
KVM s3 Client on the supported operating systems. Configurations with less than the
recommended requirements are not supported.
• 500 MHz Pentium III
• 256 MB RAM
• 10BASE-T or 100BASE-T NIC
• XGA video with graphics accelerator
• Desktop size must be a minimum of 800 x 600
• Color palette must be a minimum of 65,536 (16-bit) colors
2.2.1.4

Sun hardware configuration requirements

The following list contains the minimum hardware configuration requirements for
running the KVM s3 Client on Sun hardware systems. Configurations with less than the
recommended requirements are not supported.
• 333 MHz Pentium Ultra SPARC-IIi
• 128 MB RAM
• 10 or 100 BaseT NIC
• Video card with graphics accelerator
• Desktop size must be a minimum of 800 x 600
• Color palette must be a minimum of 65,536 (16-bit) colors
2.2.1.5

Browser requirements

You will need one of the following browsers installed on the computer to run the KVM s3
Client:
• Microsoft Internet Explorer 6.0 or later (Windows only)
• Mozilla 1.4 or later
• Firefox 1.0 or later
2.2.2

Installing the software

The KVM s3 Client can be installed on Microsoft Windows and Linux platforms. Follow
these instructions to install the KVM s3 Client on the desired platform.
2.2.2.1

Installing on Microsoft Windows

Insert the KVM s3 Client CD into the CD drive. Complete one of the following steps:
• If AutoPlay is supported and enabled, the setup program starts automatically.
-or-
8
590-784-609D