Managing The Scan Sequence; Pausing Or Restarting A Scan Sequence; Disabling A Target Device Thumbnail In The Scan Sequence; Enabling A Target Device Thumbnail In The Scan Sequence - Fujitsu KVM s2-0411 Bedienungsanleitung

Using the Video Viewer
4.8.4

Managing the scan sequence

4.8.4.1

Pausing or restarting a scan sequence

Select Options - Pause Scan from the Thumbnail Viewer menu.
The scan sequence pauses at the current thumbnail if the Thumbnail Viewer has a
scan in progress or restarts the scan if currently paused.
4.8.4.2

Disabling a target device thumbnail in the scan sequence

Select a target device thumbnail. Select Thumbnail - "target device name" -
Enable from the Thumbnail Viewer menu. (The Enable menu item state can be tog-
gled from checked (enabled) to unchecked (disabled) each time it is selected).
Right-click on a target device thumbnail and select Disable from the pop-up menu.
Updating of that thumbnail image stops until it is enabled again.
4.8.4.3

Enabling a target device thumbnail in the scan sequence

Select a target device thumbnail. Select Thumbnail - "target device name" -
Enable from the Thumbnail Viewer menu. (The Enable menu item state can be tog-
gled from checked (enabled) to unchecked (disabled) each time it is selected).
Right-click on a target device thumbnail and select Enable from the pop-up menu.
Updating of that thumbnail image resumes.
If a target device is currently being accessed by a user, the Enable Scan menu is
disabled for that target device thumbnail.
4.8.5 Using the Thumbnail Viewer to open a session to a
target device
Select a target device thumbnail. Select Thumbnail - "target device name" - View
Interactive Session from the Thumbnail Viewer menu.
Right-click on a target device thumbnail and select View Interactive Session from
the Thumbnail Viewer menu.
Double-click on a target device thumbnail.
That target device desktop opens in a Video Viewer window.
4.8.5.1

Setting target device credentials from the Thumbnail Viewer

Complete one of the following steps:
• Select a target device thumbnail. Select Thumbnail - "target device name" -
Credentials from the Thumbnail Viewer menu.
-or-
• Right-click on a target device thumbnail and select Credentials from the pop-
up menu. The Login window opens.
-or-
• Double-click the thumbnail window.
Enter a user name and password for the target device.
46
590-784-609D