Using the KVM s3 Client Appliance Management Panel
Figure 30: AMP SNMP - Traps subcategory
Complete one of the following steps:
•
Select or clear the individual trap check boxes.
-or-
•
To enable all traps, click the Enable All button.
-or-
•
To disable all traps, click the Disable All button.
Complete one of the following steps:
•
Click Apply to save any changes without exiting the AMP.
-or-
•
Click OK to save any changes and exit the AMP.
-or-
•
Click Cancel to exit the AMP without saving any changes.
88
590-784-609D