Rdp Properties - Fujitsu KVM s2-0411 Bedienungsanleitung
Vorschau ausblenden
Andere Handbücher für KVM s2-0411:
- Schnellinstallationsanleitung (2 Seiten) ,
- Bedienungsanleitung (110 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
KVM s3 Client Explorer
Enable or disable the Launch In Command window checkbox. When enabled, the
user-specified VNC application will be launched from within an OS command win-
dow.
Click OK.
3.5.7
RDP Properties
When you indicate a user-specified RDP application, you may include its command line
arguments. A selection of macros is available for placement in the command line; this
may be useful for automatic replacement of variables such as IP address, port number,
user name and password. For RDP commands that do not provide their own GUI, such
as those for computers running Windows, Linux and Unix operating systems, you can
launch the RDP application from within an OS command window.
To change RDP properties:
Select a unit from the list.
Complete one of the following steps:
•
Select View — Properties from the Network Access Software menu.
-or-
•
Click the Properties task button.
-or-
•
Right-click on the unit. Select Properties from the pop-up menu. The Proper-
ties dialog box appears.
Click the RDP tab.
For servers only, in the IP Address field, enter an IP address in dot notation or enter
a 1-128 character domain name. You may use either an IPv4 or IPv6 IP address or
duplicate addresses. Spaces are not allowed.
In the Port field, enter a port number in the range 23-65535. If blank, port 23 is
used.
Enable or disable the Use Default checkbox. When enabled, the default global set-
ting specified in Options will be used and all other portions of the Application to
Launch area are disabled.
Enter the directory path and name or click the Browse button to locate the path and
name.
Complete one of the following steps:
•
Enter command line arguments in the box below the path and name.
-or-
•
To insert a predefined macro at the cursor location in the command line, click
the Insert Macro list box and select a macro from the drop-down menu. The
Network Access Software will automatically replace these variables when the
application runs.
Enable or disable the Launch in command window checkbox. When enabled, the
user-specified RDP application will be launched from within an OS command win-
dow.
Click OK.
26
590-784-609D
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
