Locking And Unlocking User Accounts; Enabling Or Disabling Security Lock-Out; Unlocking An Account - Fujitsu KVM s2-0411 Bedienungsanleitung

Add, Modify and Delete user operations may be combined and saved at the
same time by pressing the Apply or OK buttons on the AMP when done with
the changes.
5.7.3

Locking and unlocking user accounts

When the security lock-out feature is enabled, and a user enters an invalid password
five consecutive times, that user account is disabled for a specified number of hours, or
until it is unlocked or the appliance is rebooted. If a locked-out user tries to log in during
the lock-out period, an error message is displayed. A closed-lock icon is visible next to
the names of locked-out users on the AMP Users category. Security lock-out, when
enabled, applies to all local user accounts on the appliance, but not to LDAP users.
An appliance administrator can specify the lock-out period. A user administrator can
unlock only user accounts; an appliance administrator can unlock any type of account.
When the security lock-out feature is disabled, no users are locked-out. Disabling
security lock-out has no effect on users who are already locked-out.
5.7.3.1

Enabling or disabling security lock-out

Click the Settings tab in the AMP.
Select the Users category.
Complete one of the following steps:
• Select the Enable Lock-outs checkbox. Enter the number of hours (1 to 99) in
the lock-out period in the Duration field.
-or-
• Clear the Enable Lock-outs checkbox.
Complete one of the following steps:
• Click Apply to save any changes without exiting the AMP.
-or-
• Click OK to save any changes and exit the AMP.
-or-
• Click Cancel to exit the AMP without saving any changes.
5.7.3.2

Unlocking an account

Click the Settings tab in the AMP.
Select the Users category.
Select the user to unlock.
Click the Unlock button.
Complete one of the following steps:
• Click Apply to save any changes without exiting the AMP.
-or-
• Click OK to save any changes and exit the AMP.
-or-
• Click Cancel to exit the AMP without saving any changes.
A locked-out user is unlocked if the appliance is rebooted or when the configured lock-
out duration expires.
590-784-609D
Locking and unlocking user accounts
81