Managing Snmp Traps; Enabling Or Disabling Snmp Traps - Fujitsu KVM s2-0411 Bedienungsanleitung

-or-
• Click No to reboot at a later time.
5.10.2

Managing SNMP traps

An SNMP trap is a notification sent by the appliance to a management computer,
indicating that an event has occurred in the appliance that can require further attention.
You can specify which individual SNMP traps are sent to the management computers
by selecting the corresponding check boxes, or you can enable or disable all traps. All of
the FTS KVM appliances have enterprise traps. To interpret these traps correctly,
download the corresponding trap MIB from the Fujitsu Technology Solutions Web site.
5.10.3

Enabling or disabling SNMP traps

Click the Settings tab in the AMP.
Select the SNMP - Traps subcategory. A list of traps is displayed. Traps that are
currently enabled are selected; disabled traps are not selected.
590-784-609D
Managing SNMP traps
87