Using Stealth Mode; Enabling Stealth Kvm Sessions On An Appliance; Monitoring A Target Device In Stealth Mode - Fujitsu KVM s2-0411 Bedienungsanleitung

Using the Video Viewer
If you are not prompted to connect in share mode, either the appliance to which the
target device is connected is not configured to allow digital share mode sessions or it is
not a KVM s2-0411 or KVM s3-1621 appliance.
4.7

Using stealth mode

Administrators can connect to a target device in stealth mode, viewing the video output
of a remote user undetected. When in stealth mode, the administrator does not have
keyboard or mouse control over the target device.
You cannot use stealth mode when connecting to a target device on a
KVM s2-1611 appliance.
4.7.1

Enabling stealth KVM sessions on an appliance

Click the Appliances tab in the Explorer.
Complete one of the following steps:
• Double-click on an appliance in the Unit list.
-or-
• Select an appliance from the Unit list, then click the Manage Appliance button.
-or-
• Right-click on an appliance in the Unit list. Select Manage Appliance from the
pop-up menu.
-or-
• Select an appliance in the Unit list and press Enter.
Click the Settings tab in the AMP.
Select the Global - Sessions subcategory.
Select the Enable Share Mode checkbox in the Connection Sharing area.
Select Stealth Connections in the Connection Sharing area.
Complete one of the following steps:
• Click Apply to save any changes without exiting the AMP.
-or-
• Click OK to save any changes and exit the AMP.
-or-
• Click Cancel to exit the AMP without saving any changes.
4.7.2

Monitoring a target device in stealth mode

Click the Devices tab in the Explorer.
Complete one of the following steps:
• Double-click on the target device in the Unit list.
-or-
• Select the target device, then click the Connect Video button.
-or-
42
590-784-609D