KVM s3 Client Explorer
3.5.1
Viewing and changing general properties
In general properties, you can specify a unit Name, Type (target device only), Icon, Site,
Department, and Location. (To customize the Site, Department, and Location field
labels, see "Changing custom field names" on page 27.)
Select a unit in the Unit list.
Complete one of the following steps:
•
Select View - Properties from the Explorer menu.
-or-
•
Click the Properties button.
-or-
•
Right-click on the unit. Select Properties from the pop-up menu.
The General Properties window opens.
Figure 5: Device General Properties window
In the Name field, type a 1- to 32-character unique name. (This name is local to the
software database; the appliance database might contain a different name for this
unit.)
The Type field is read-only for appliances. For a target device, select a type from
the pull-down menu or enter a 1 to 32 character type in the text field.
In the Icon field, select an icon from the pull-down menu.
In the Site, Department, and Location fields, select an entry from the pull-down
menu or enter a 1 to 32 character Site, Department, or Location in the correspond-
ing text field.
Complete one of the following steps:
22
590-784-609D