Vnc Properties - Fujitsu KVM s2-0411 Bedienungsanleitung

• Click the Properties button.
-or-
• Right-click on the unit. Select Properties from the pop-up menu.
The Properties window opens.
Click the Connections tab.
3.5.6

VNC Properties

When you indicate a user-specified VNC application, you may include its command line
arguments. A selection of macros is available for placement in the command line; this
may be useful for automatic replacement of variables such as IP address, port number,
user name and password. For VNC commands that do not provide their own GUI, such
as those for computers running Windows, Linux and Unix
launch the VNC application from within an OS command window.
To change VNC properties:
Select a unit from the list.
Complete one of the following steps:
• Select View — Properties from the Network Access Software menu.
-or-
• Click the Properties task button.
-or-
• Right-click on the unit. Select Properties from the pop-up menu.
The Properties window appears.
Click the VNC tab.
For servers only, in the IP Address field, enter an IP address in dot notation or a 1-
128 character domain name. You may use either an IPv4 or IPv6 IP address or
duplicate addresses. Spaces are not allowed.
In the Port field, enter a port number in the range 23-65535. If blank, port 23 is
used.
Enable or disable the Use Default checkbox. When this setting is enabled, the
default global setting specified in Options will be used and all other portions of the
Application to Launch area are disabled.
Enter the directory path and name or click the Browse button to locate the path and
name.
Complete one of the following steps:
• Enter command line arguments in the box below the path and name.
-or-
• To insert a predefined macro at the cursor location in the command line, click
the Insert Macro list box and select a macro from the drop-down menu. Net-
work Access Software will automatically replace these variables when the
application runs.
590-784-609D
VNC Properties
®
operating systems, you can
25