Inhaltsverzeichnis
Werbung
AC MAGNETO AND STARTER CLUTCH
2
1
3
9. Install:
• Cover (idle gear 1) 1
• Bolt 2
NOTE:
Install the cover (idle gear 1) with its mark a
facing upward.
10. Install:
• Engine guard 1
• Bolt [engine guard (front)] 2
• Bolt [engine guard (rear)] 3
11. Connect:
• AC magneto lead
Refer to "CABLE ROUTING DIAGRAM"
section in the CHAPTER 2.
12. Install:
• Shift pedal 1
• Bolt (shift pedal)
NOTE:
When installing the shift pedal onto the shift
shaft, be sure that the center of the shift pedal
is about 1 mm (0.04 in) a above the top of the
footrest.
4 - 85
ENG
10 Nm (1.0 m · kg, 7.2 ft · lb)
34 Nm (3.4 m · kg, 24 ft · lb)
23 Nm (2.3 m · kg, 17 ft · lb)
12 Nm (1.2 m · kg, 8.7 ft · lb)
Werbung
Inhaltsverzeichnis
