Beyerdynamic MCS Bedienungsanleitung Seite 51

6.9 Example for Configuration "Number of Stations"
In each line up to 32 stations can be connected to the control unit.
If for example 16 stations are to be connected in line 1 and 17 stations in line 2, you must do the following:
1. MCS Editor Software
Enter the number 64 into the field "Number of Stations". Now you have 64 stations to configure: 1 to 32 in line 1 and 33 to 64
in line 2 that is the stations 1 to 16 in line 1 and the stations 33 to 50 in line 2 (corresponds to the 17 microphone units connected
in line 2). A possible chairman station in line 2, e.g. station no. 7 corresponds to station no. 40 in the MCS Editor. Save the configuration
and download the file into the Control Unit. The control unit is now looking for 64 stations, but there are only 33 connected.
2. MCS Control Unit
Close the MCS Editor Software or disconnect the PC from the control unit.
Start the configuration with the multi-function buttons and LC-Display.
Enter the number of stations into the configuration menu (in this example 33). Refer also to chapter "5.3 Configuration".
When the configuration is finished, the system works with 33 stations.
In the system check the control unit is looking for 33 stations and will find them.
51