Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
20
-
+
Reset
N.o.m.
2. Parameter
Operation mode
More
Reset
N.o.m.
Autonomy
Override
OK
Reset
N.o.m.
There are four operation modes:
1. Request-to-Talk
This mode is only possible with an operator manually controlling a PC, media control system (AMX/Panja
chairman microphone unit with "Next"-function. When pressing the microphone button of the microphone unit the system
registers a request-to-talk. The operator at the PC, console or "Next"-button has control over who speaks next.
2. Autonomy
Each participant can switch on or off his microphone unit until the maximum number of open microphones (NOM) is reached.
3. Override
Each switched on microphone unit switches off the previously activated microphone unit.
4. Automatic
This operation mode is only active when the microphone units have been equipped with an automatic upgrade module. The
microphone unit is then voice controlled, i.e. when a participant starts to talk his microphone unit is switched on automatically
irrespective of the NOM. In practice it is recommended to use an automatic mixing system (AM 3040/3080) to control the
switchable microphone units. We recommend this operation mode only when using microphone units with an integrated
loudspeaker.
3. Parameter
Button mode
More
Reset
N.o.m.
ON/OFF
PTT
Reset
N.o.m.
44
Press the left button (4) or right button (5) to enter the number. It is possible to enter 64
microphone units at maximum.
In this menu the operation mode is adjusted.
Possibilities are: Autonomy, Override, Automatic, Request-to-Talk
The current adjustment is shown in the top line. The operation mode is chosen with the left
button (4), using the right button (5) the chosen operation mode is confirmed and appears in the top
line as present operation mode.
In this menu the button function is adjusted in the microphone units.
The current adjustment is shown in the top line.
Switching:
The microphone unit is switched on and off with the microphone button.
Push-To-Talk: The microphone button acts as a Push-To-Talk button (PTT) i.e. the microphone unit
is switched on as long as the microphone button is pressed.
, Crestron
) or a
®
®
Werbung
Inhaltsverzeichnis
