Unpacking And Assembly - Checchi & Magli WOLF PRO Bedienungs- Und Wartungsanleitung

The type of packing is chosen according to the selected
means of transport and the destination.
To keep packaging as compact as possible, the device is
shipped disassembled.
All the information for safe loading/unloading proce-
dures is printed on the packing.
The illustration shows the dimensions of the packaging
and the lifting method.
Storage method
WARNING
Do not place the packed machines on top of each
other as they are not designed to be stacked.
Upon receipt of the supplies, check the exact quantities
of the parts against the shipping documents and that

Unpacking and assembly

During installation, dispose of all parts of the packaging
according to the constituent materials and in compli-
ance with applicable legislation.
Installation operations must be carried out by personnel
that are qualified, authorized and specifically trained to
Safety advice for the adjustments
Adjustment work must be carried out with the work
vehicle on flat, compact ground, with the machine
resting on the ground (except where expressly stat-
ed otherwise in the manual).
Spray adjustment
The spray must be aimed at the centre of the planted
seedling.
English language
INFORMATION CONCERNING HANDLING AND INSTALLATION
INFORMAZIONI SULLA MOVIMENTAZIONE E INSTALLAZIONE
ADJUSTMENT INFORMATION
0
8 0
1 0
0 0
UN41-0928UA
they are all in good condition.
Prior to receiving the supplies, the owner must prepare
an appropriate area (preferably indoors) within which to
place the packages for storage.
Avoid storing the equipment in places where weather
conditions could prejudice its good working order.
perform such tasks.
Any party authorised to assemble the device must have
the necessary documentation to ensure it is assembled
properly and safely; if this is not the case, such documen-
tation must be requested from the manufacturer.
The tractor engine must be switched off, the parking
brake engaged, and the ignition key removed, and
all the necessary safety measures required to work
safely must be taken.
For adjustments, carry out the procedure outlined.
1) Loosen the knob (A).
6
4
4
5
Use and maintenance