Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instructed person
Instructed persons were instructed by the operating company regarding the assigned tasks and
any possible risks of improper behaviour.
1.6.2
Authorized persons
WARNING!
Inappropriate operation and maintenance of the geared drill constitutes a danger to the
personnel, objects and the environment.
Only authorized personnel may operate the geared drill !
Authorized operating and maintenance personnel are specialists instructed and trained by the
operator and the manufacturer.
The operating company must
train the personnel,
instruct the personnel in regular intervals (at least once a year) on
- all safety regulations relevant to the machine,
- its operation and
- generally accepted engineering standards.
check the personnel's knowledge level,
document the training/instruction,
have attendance at the training/instruction confirmed by signature and
check whether the personnel is working safety and risk-conscious and observes the operat-
ing instructions.
Define and document the machine inspection deadlines in accordance with section 3 of the
Factory Safety Order and perform an operational risk analysis in accordance with section 6
of the Safety at Work Act.
The operator must
have obtained a training regarding the handling of the geared drill,
know the function and mode of action,
before taking the machine in operation
- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
Additional requirements apply for work on the following machine components:
Electric components or operating materials: Must only be worked on by a qualified electri-
cian or person working under the instructions and supervision of a qualified electrician.
Before starting work on electrical parts or operating agents, the following actions must be taken
in the order given:
disconnect all poles,
secure against restarting,
check that there is no voltage.
1.7
User positions
The operator position is in front of the geared drill.
INFORMATION
The mains plug of the geared drill must be freely accessible.
EN
DH40G | DH40GP
54
Translation of original instructions
Obligations of the
operating
company
Obligations of the
operator
Additional
requirements
regarding the
qualification
Safety
Version 1.0.1 - 2020-11-24
Werbung
Inhaltsverzeichnis
