Obligations Of The Operator; Operator Positions - Optimum OPTIdrill DH 28BV Betriebsanleitung

Obligations of the operating company
train the personnel,

instruct the personnel in regular intervals (at least once a year) on

- all safety standards that apply to the machine,
- the operation,
- generally accepted engineering standards.
check the personnel's knowledge level,

document the trainings/instructions,

require personnel to confirm participation in training/instructions by means of a signature,

check whether the personnel is working in a safety and risk-conscious manner and follow-

ing the operating instructions.
define and document the inspection deadlines for the machine in accordance with the Fac-

tory Safety Act and perform an operational risk analysis in accordance with the Work Safety
Act.

Obligations of the operator

have obtained a training regarding the handling of the drilling machine,

know the function and mode of action,

before taking the machine in operation

- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
Additional requirements apply for work on the following machine components:
Electrical parts or operating agents: shall only be performed by an electrician or under the

guidance and supervision of an electrician.
Before starting work on electrical parts or operating agents, following measures are to be

performed in the following order:

disconnect all poles

secure against restarting

check that there is no voltage
1.7

Operator positions

The operator's position is in front of the drilling machine.
EN
DH24BV | DH28BV | DH34BV | DH40BV
72 Translation of original instruction
Obligations of the
operating
company
Obligations of the
operator
Additional
requirements
regarding the
qualification
Safety
Version 1.1.4 - 2022-09-14