Authorized Persons; Operator Positions - Optimum OPTIdrill B 34H Betriebsanleitung

1.6.2

Authorized persons

WARNING!
Inappropriate operation and maintenance of the geared drill constitutes a danger for the
staff, objects and the environment.
Only authorized staff may operate the geared drill!
Persons authorized to operate and maintain should be trained technical staff and instructed by
the ones who are working for the operating company and for the manufacturer.
The operating company must

train the staff,

instruct the staff in regular intervals (at least once a year) on
- all safety standards that apply to the machine,
- the operation,
- accredited technical guidelines,

check staff's state of knowledge,

document the trainings/instructions,

require staff to confirm participation in training/instructions by means of a signature,

check whether the staff is working safety- and risk-conscious and observe the operating
instructions.
The operator must

have obtained a training regarding the handling of the geared drill,

know the function and mode of action,

before taking the machine in operation
- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
For work on the following parts there are additional requirements:

Electrical parts or operating agents: shall only be performed by an electrician or under the
guidance and supervision of an electrician.

Before starting work on electrical parts or operating agents, following measures are to be
performed in the following order.

Disconnect all poles.

Secure against switching on.

Check if the machine is zero potential.
1.7

Operator positions

The operator's position is in front of the geared
drill.
GB B34H | B34HV
74 Translation of the original instructions
Obligations of the
operating
company
Obligations of the
operator
Additional
requirements
regarding the
qualification
Safety
Version 1.1.3 - 2020-07-21