Individual Protection Gear - Optimum OPTIdrill B 50GSM Betriebsanleitung

General check
Equipment
Protective covers
Drill chuck protection
Signs,
Markings
Date:
Functional check
Equipment
EMERGENCY STOP
impact switch
Drill chuck protection
Date:
1.11

Individual protection gear

For certain work individual protection gear as protective equipment. This includes:
Safety helmet,

Protective goggles or face guard,

Protective gloves,

Safety shoes with steel toe caps,

Ear protection

hairnet

Before starting work, make sure that the prescribed individual protection gear is available in the
workplace.
CAUTION!
Dirty or contaminated personnel protective equipment can cause diseases.
Clean your individual protection gear

after each use,

regularly, at least once a week.
Personal protective equipment for special works
Protect your face and eyes: Wear a safety helmet with facial protection when performing works
where your face and eyes are exposed to hazards.
Use protective gloves when handling pieces with sharp edges.
During operation of the drill, the wearing of gloves is prohibited because of the risk of winding
up.
Use safety shoes when you assemble, disassemble or transport heavy components.
EN
B50 GSM
70
Check
Mounted, firmly bolted and not damaged
Installed and legible
checked by (signature):
Check
After actuating an EMERGENCY STOP push button the
geared drill must be switched off.
The geared drill must only be switched on, if the drill chuck
protection is closed.
checked by (signature):
Translation of original instruction
OK
OK
Safety
Version 1.1.4 - 2021-01-04