Unpacking The Machine; Transport; Anchoring The Drill - Optimum Optidrill DX 13V Betriebsanleitung

3.2

Unpacking the machine

Transport the drilling machine in its packing crate near its final installation location with a lift
truck before unpacking it. If the packaging shows signs of possible transport damage, take the
necessary precautions not to damage the machine when unpacking it. If any damage is discov-
ered, the carrier and/or shipper must be notified immediately to be able to initiate the neces-
sary steps for a claim.
Inspect the machine completely and carefully, making sure that all materials, such as shipping
documents, manuals and accessories supplied with the machine have been received.
3.3

Transport

The machine can be transported with forklifts or lift trucks. The commonly accepted and local
regulations regarding machine transport apply.
3.4

Anchoring the Drill

DANGER!
Danger of crushing and overturning. The drilling machine must be installed by several
people.
Weight: DX13V - 51 kg, DX15V - 66 kg.

Check that the drilling machine foundation is horizontal with a spirit level.

Check that the foundation has sufficient load-bearing capacity and rigidity.

Anchor the machine base or the optional machine base onto the floor before positioning the
machine on it.
Centre of Gravity Without a Machine Base,

DX15V Dimensions on page 46
EN DX13V | DX15V
48

DX13V Dimensions on page 45
Originalbetriebsanleitung Version 1.0.4 - 2021-08-30