Wheel Locking Force Adjustment - Stryker 6100 RUGGED M1 Bedienungsanleitung

WHEEL LOCKING FORCE ADJUSTMENT

MINIMUM
1. To adjust the wheel locking force, remove the button head cap screw (item C), washer (item D) and hex
nut (item E) from the center of the lock pedal. The wheel lock is initially assembled with the pedal set
at the minimum locking force. The marker on the pedal (item A) is aligned with the marker on the octago-
nal sleeve (item B).
2. Remove the sleeve (item B). Rotate the sleeve counterclockwise to increase the pedal locking force and
clockwise to decrease the locking force. Insert the sleeve into the pedal. Reinstall the hex socket screw.
3. Test the pedal locking force before returning the cot to service.
Preventative Maintenance
1−43
MAXIMUM