Stryker 6100 RUGGED M1 Bedienungsanleitung Seite 38

Pedi−Matet Infant Restraint System Attachment Instructions
Refer to the Pedi−Matet users manual for the manufacturer's recommendations for the use, operation and
care of the Pedi−Matet Infant Restraint System.
Securing the Pedi−Matet to the cot
1. Remove any restraints already attached to the cot.
2. Raise the cot backrest to the full upright position.
3. Position the Pedi−Matet pad flat on the backrest with the black backrest straps out (see Figure 12).
Figure 12 − Positioning the Pedi−Matet
4. Wrap the straps around the backrest and securely fasten the buckle behind the cylinder.
WARNING
To avoid accidental release of the Pedi−Matet, and possible injury to the infant, ensure the buckle is located
away from obstructions on the cot or head end storage pouch.
1−36