Stryker 6100 RUGGED M1 Bedienungsanleitung Seite 39

Pedi−Matet Infant Restraint System Attachment Instructions
5. Pull firmly on the end of the adjustable backrest strap and tighten it securely.
6. Insert the mainframe straps between the cot frame and the mattress. To ensure the release button is
toward the foot end of the cot, insert the buckle behind the litter crossbrace and bring it up in front of the
crossbrace. Secure the buckle around the crossbrace, leaving a little slack in the strap for final adjust-
ment (see Figure 14).
Figure 14 − Securing the Safety Restraints on a RuggedtCot
WARNING
To avoid accidental release of the Pedi−Matet, and possible injury to the infant, ensure the buckle is located
away from obstructions on the cot.
7. Verify all the straps are snug and fastened securely (see Figure 15).
These are general instructions for installation of the Pedi−Matet. Safe and proper use of the Pedi−Matet is solely at
the discretion of the user. Stryker recommends all users be trained on the proper use of the Pedi−Matet before using it
in an actual situation.
Retain these instructions for future reference. Include them with the product in the event of transfer to new users.
Pedi−Matet is a trademark of Ferno−Washington Inc.
Figure 15− Pedi−Matet Strapped to a Ruggedt Cot
1−37