Wheel Lock - Stryker 6100 RUGGED M1 Bedienungsanleitung

Wheel Lock

To activate the wheel lock, press fully down on the pedal (A) until it stops.
To release the wheel lock, depress the upper face of the wheel lock pedal with your foot or lift up with your
toe under the pedal. The upper portion of the pedal will rest against the caster frame when the wheel
lock is released.
WARNING
The wheel lock is only intended to help prevent the cot from rolling while unattended. The wheel lock may
not provide sufficient resistance on all surfaces or under loads.
Never apply the wheel lock while a patient is on the cot. Tipping could occur if the cot is moved while the wheel
lock is applied, resulting in injury to the patient or operator and/or damage to the cot.
Never leave a patient unattended on the cot or injury could result. Hold the cot securely while a patient is
on the cot.
Cot Operation
1−23
A