Cot Operation
3−Stage I.V. Pole (Optional Equipment)
1. Lift and pivot the pole from the storage position and push down until
F
it is locked into receptacle (A).
2. To raise the height of the pole, turn the lock actuator (B) counter-
clockwise and pull up on the bottom telescoping portion (C) of the pole
to raise it to the desired height.
D
3. Turn the lock actuator (B) clockwise to lock the bottom telescoping
portion in place.
4. For a higher I.V. pole, pull up on section (D) until the spring clip (E)
engages.
E
5. Hang I.V. bags on the I.V. hook (F).
CAUTION
The weight of the I.V. bags should not exceed 40 pounds.
6. To lower the I.V. pole, push in on the spring clip (E) and slide section
(D) down into section (C). Turn the lock actuator (B) counterclockwise
C
and slide section (C) into the bottom tube.
7. Lift up and pivot the pole down into the storage position.
B
Storage Position
A
1−31