Choke Cable Inspection And Adjustment; Qsts Cable Inspection And Adjustment - Yamaha WaveRunner XLT800 Wartungshandbuch

INSP
ADJ
CONTROL SYSTEM
Turn in
Turn out
G Tighten the locknut.
Install the handlebar cover.
G
WARNING
After adjusting the free play, turn the han-
dlebar to the right and left and make sure
that the trolling speed does not increase.

Choke cable inspection and adjustment

1. Inspect:
Choke knob
G
(pull the choke knob all the way out)
Choke knob automatically returns →
Adjust.
Adjustment steps:
Turn in the adjusting nut 1 until the
G
choke knob does not automatically
return.

QSTS cable inspection and adjustment

1. Measure:
Jet thrust nozzle set length a, b
G
Difference → Adjus
Measurement steps:
G Set the control grip in the neutral posi-
tion.
Set the jet thrust nozzle in the center
G
position.
Measure the jet thrust nozzle set
G
length a and b.
If a and b length are not even, adjust
G
the cable joint.
3-4
Free play is increased.
Free play is decreased.
t.
E