Yamaha WaveRunner XLT800 Wartungshandbuch Seite 430

HULL
HOOD
REMOTE CONTROL CABLES AND
SPEED SENSOR LEAD
QSTS cable (jet pump end) installation
1. Install:
QSTS cable (jet pump end) a
G
QSTS cable set length
(jet pump end):
12.0–14.0 mm (0.47–0.55 in)
WARNING
The QSTS cable must be screwed in more
than 8 mm (0.31 in).
QSTS cable stopper installation
1. Install:
QSTS cable stopper
G
WARNING
Be sure to fit the projection 1 on the QSTS
cable stopper into the groove in the outer
cable.
Shift cable (jet pump end) installation
1. Install:
Shift cable (jet pump end) a
G
Shift cable set length
(jet pump end):
12.2–13.8 mm (0.48–0.54 in)
WARNING
The shift cable must be screwed in more
than 8 mm (0.31 in).
8-19
E