Intended Use - Optimum OPTIdrill B 34H Betriebsanleitung

Activation forbidden!
Use protective glasses!
1.3

Intended use

WARNING!
In the event of improper use of the geared drill

there may be a risk to the staff,

the machine and other material property of the operating company will be endange-
red,
the correct function of the geared drill may be affected.
The geared drill is designed and manufactured to be used in a non-explosive environment. The
geared drill is designed and manufactured for holes in cold metals or other non flammable
materials or that not constitute a health hazard using a rotating filing-stripping tool that has a
number of grooves for collecting the filings.
If the geared drill is used in any way other than described above, modified without authoriza-
tion of Optimum Maschinen Germany GmbH, then the geared drill is being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accor-
dance with the intended use.
We expressly point out that the guarantee or CE conformity will expire due to any constructive
technical or procedural changes which had not been performed by the company Optimum
Maschinen Germany GmbH.
It is also part of intended use that you

observe the limits of the geared drill,

the operating manual is observed,

the inspection and maintenance instructions are observed.

Technical data on page 81
WARNING!
Extremely severe injuries.
It is forbidden to make any modifications or alternations to the operation values of the
geared drill. They could endanger the staff and cause damage to the geared drill.
ATTENTION!
If the geared drill is not used as intended or if the safety directives or the operating
instructions are ignored the liability of the manufacturer for any damages to persons or
objects resulting hereof is excluded and the claim under guarantee is becoming null and
void!
GB B34H | B34HV
70
Use ear protection!
Use protective gloves!
Translation of the original instructions
Disconnect the mains plug!
Read the operating
instructions before
commissioning!
Use protective boots! Use protective suit!
Safety
Version 1.1.3 - 2020-07-21